Giga Lamp
Properly Replacing a Lamp Socket

Properly Replacing a Lamp Socket

There are a few things more annoying than a flickering lamp. A lamp that constantly flickers is a distraction to the user and can even be harmful to the eyes, especially if you are using the lamp for various tasks.

The most probable reason why your floor lamp is flickering or is difficult to turn on is due to a faulty lamp socket. For many people, a faulty or broken lamp socket means it is time to purchase a new floor lamp. This is a very wasteful solution to a simple problem.

Learning how to replace a lamp socket properly can help you save money and a few floor lamps along the way.

If you fancy yourself as someone who likes to fiddle and repair things or if you’re someone who wants to save money by learning DIY repair tips this might be of interest to you. Here are some helpful how to replace a lamp socket steps you can try using.

Step 1: Checking The Socket Type.

Take a look at your lamp and see where the switch is located. It can either be on the side, or it can be found toggling through the entire socket, or it can be located on the bottom of the lamp. These are three most basic lamp switches, and you should check this out before going to the store to buy the parts you need.

Step 2: Safety All The Way.

Since you are dealing with a floor lamp that relies on electricity for power, make sure to plug off the lamp before doing any repairs. This will allow you to avoid all accidents and further damaging your lamp.

Step 3: Dealing With The Bulb.

When the bulb is safe to handle, you may remove it and take off the glass. This step may vary depending on the type of bulb you have, but the simplest way is to unscrew the simple plastic retailer before you pull off the class.

Step 4: The Socket.

If you have a socket the screws on the side, carefully and gently unscrew it. You will then be able to pull out the lamp socket safely and easily.

Step 5: Handling the Wires.

The wires on the socket will be held in place by screws. Loosen these first and then carefully remove them. Before you fully take the wires out, make notes or mark them to know which wire goes where in the new socket.

Don’t get discouraged in this step because it is fairly easy to do. Some sockets even just have two wires so it is very manageable that a novice can learn how to replace a lamp socket.

Step 6: The New Socket.

Take hold of the new socket and loosen its screws. With the previous wire position in mind, wrap them on the correct screws accordingly and then tighten the screws in place. When you are doing this step, be extra careful that none of the bare wires end up touching each other.

Step 7: Finishing Up.

To finish the lamp socket replacement, do steps 2 to 4 in reverse, making sure you handle all the wires, screws, and bulb gently.

Step 8: You’re Done!

Plug in the newly replaced lamp socket and start using your lamp without the flickering.


Throwing out a lamp that flickers or is hard to switch on is a big waste of money. Taking the time to learn the simple and easy steps that are required for replacing a faulty lamp socket will be a big money saver.

When you take the time and effort to repair a seemingly broken lamp you get to save a good lamp from ending up in a dumpster. This is a very important skill for those who love DIY repairs and those who are interested in saving a few extra bucks along the way.

Mastering the skills of how to replace a lamp socket is not intimidating at all. Even those without much experience with electronics or repairs like this will find it very easy to manage. The important thing with replacing a lamp socket is safety and double checking.

Always unplug the floor lamp before working on it, and if you are not very confident with the repairs you’ve made make sure to ask someone with experience for their opinion. Do not continue using a faulty floor lamp as this may lead to accidents, repair them instead.

Leave a Comment: